Figure 2-14 Tray 2 Paper Size Switches - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Tray 2 paper size switches (SW4, SW6)
1. Remove Tray 2 and Tray 3, and then push the switches at the back of the tray cavity.
Figure 2-14
2. Check the control-panel display for sensor response.
3. If there is no response, replace the lifter drive assembly.
126 Chapter 2 Solve problems
Tray 2 paper size switches
ENWW