Table 2-45 Network Settings Menu; Table 2-46 Jetdirect Menu - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Table 2-45 Network Settings menu
First level
I/O Timeout
Jetdirect Menu
Table 2-46 Jetdirect Menu
First level Second level
Information Print Sec Report
TCP/IP Enable
Host Name
ENWW
Values
Range: 5 – 300 sec
Default = 15
See the table that follows for details. These
menus have the same structure. If an
additional HP Jetdirect network card is
installed in the EIO slot, then both menus are
available.
Third level Fourth level
Description
Use to set the I/O timeout period in seconds.
I/O timeout refers to the elapsed time before
a print job fails. If the stream of data that the
product receives for a print job gets
interrupted, this setting indicates how long
the product will wait before it reports that the
job has failed.
Values Description
Yes Yes: Prints a page
that contains the
No*
current security
settings on the
HP Jetdirect print
server.
No: A security
settings page is not
printed.
On* On: Enable the TCP/
IP protocol.
Off
Off: Disable the
TCP/IP protocol.
Use the arrow An alphanumeric
buttons to edit the string, up to 32
host name. characters, used to
identify the product.
NPIXXXXXX*
This name is listed on
the HP Jetdirect
configuration page.
The default host
name is NPIxxxxxx,
where xxxxxx is the
last six digits of the
LAN hardware
(MAC) address.
Tools for troubleshooting
195