Table 2-42 Display Settings Menu - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

In the following table, asterisks (*) indicate the factory default setting.
Table 2-42 Display Settings menu
First level
Display Brightness
Language
Show IP Address
Inactivity Timeout
Clearable Warnings
Continuable Events
190 Chapter 2 Solve problems
Values
Range: -10 to 10
The default value is 0.
Select from a list of languages
that the product supports.
Display*
Hide
Range: 10 – 300 seconds
Default = 60 seconds
On
Job*
Auto-continue (10
seconds)*
Press OK to continue
Description
Use to specify the intensity of the LCD control panel display.
Use to select a different language for control-panel messages and
specify the default keyboard layout. When you select a new
language, the keyboard layout automatically changes to match the
factory default for the selected language.
Use this menu item to display or hide the IP address on the Home
screen.
Specifies the amount of time that elapses between any activity on the
control panel and when the product resets to the default settings.
When the timeout expires, the control-panel display returns to the
Home menu, and any user signed in to the product is signed out.
Use this feature to set the period that a clearable warning displays
on the control panel. If the On setting is selected, clearable
warnings appear until the Clearable Warnings button is pressed.
If theJob setting is selected, clearable warnings stay on the display
during the job that generated the warning and disappear from the
display when the next job starts.
Use this option to configure the product behavior when the product
encounters certain errors. If the Auto-continue (10 seconds)
option is selected, the job will continue after 10 seconds. If thePress
OK to continue option is selected, the job will stop and require
the user to press theOK button before continuing.
ENWW