HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung Seite 213

Table 2-40 General Print Settings menu (continued)
First level
ENWW
Second level
Orientation
Font Source
Font Number
Font Pitch
Font Point Size
Symbol Set
Values
Portrait*
Landscape
Internal*
Range: 0 – 110
Default = 0
Range: 0.44 – 99.99
Default = 10
Range: 4.00 – 999.75
Default = 12.00
Select from a list of symbol sets.
Description
Select the orientation that is most
often used for copy or scan
originals. Select the Portrait
option if the short edge is at the
top or select the Landscape
option if the long edge is at the
top.
Selects the font source for the
user-soft default font. The list of
available options varies
depending on the installed
product options.
Specifies the font number for the
user-soft default font using the
source that is specified in the
Font Source menu. The product
assigns a number to each font
and lists it on the PCL font list.
The font number displays in the
Font # column of the printout.
If the Font Source option and
the Font Number setting
indicate a contour font, then use
this feature to select a default
pitch (for a fixed-spaced font).
If the Font Source option and
the Font Number setting
indicate a contour font, then use
this feature to select a default
point size (for a proportional-
spaced font).
Select any one of several
available symbol sets from the
control panel. A symbol set is a
unique grouping of all the
characters in a font. The factory
default value for this option is
PC-8. Either PC-8 or PC-850 are
recommended for line-draw
characters.
Tools for troubleshooting
187