Left Door Switch (Sw1); Figure 2-3 Test The Left Door Switch - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Left door switch (SW1)

1.
Open the left door, gently release the door arm and lower the door until it is fully open, and then
use a small flat-blade screwdriver to activate the switch.
Figure 2-3
2.
Check the control-panel display for sensor response.
3.
If there is no response, make sure that the sensor-actuator tab on the door is not damaged or
missing.
If necessary, replace the switch.
ENWW
Test the left door switch
Tools for troubleshooting
111