Cartridge Door Switch (Sw3); Figure 2-2 Test The Cartridge Door Switch - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Cartridge door switch (SW3)

1. Open the cartridge door to activate the sensor.
Figure 2-2
2. Check the control-panel display for sensor response.
3. If there is no response, make sure that the sensor-actuator tab on the door is not damaged or
missing.
If necessary, replace the cartridge-door switch.
110 Chapter 2 Solve problems
Test the cartridge door switch
ENWW