HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung Seite 117

Table 2-1 Preboot menu options (1 of 6) (continued)
Menu option First level
3 Administrator
1 Download
2 Format Disk
3 Partial
Clean
4 Change
Password
5 Clear
Password
ENWW
Second level Third level
1 Network
2 USB
3 USB
Thumbdrive
Description
This item navigates to the 3 Administrator sub menus.
If authentication is required (and the user is not already
signed in) the 2 Sign In displays. The user is required to
sign in.
This item initiates a preboot firmware download process. A
USB device interface or a Network connection can be used
to download firmware.
This item reinitializes the disk and cleans all disk partitions.
CAUTION: Selecting the 2 Format Disk item removes
all data.
A delete confirmation prompt is not provided.
The system is not bootable after this action—a firmware
download must be performed to return the system to a
bootable state.
This item reinitializes the disk (removing all data except the
firmware repository where the master firmware bundle is
downloaded and saved).
CAUTION: Selecting the 3 Partial Clean item removes
all data except the firmware repository.
A delete confirmation prompt is not provided.
This allows user to reformat the disk by removing the
firmware image from the active directory without having to
download new firmware code (product remains bootable).
Select this item to set or change the administrator password.
Select the 5 Clear Password item to remove a password
from the Administrator menu. Before the password is
actually cleared, a message will be shown asking to confirm
that the password should be cleared. Press the OK button to
confirm the action.
When the confirmation prompt displays, press the OK
button to clear the password.
Preboot menu options
91