HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung Seite 223

Table 2-46 Jetdirect Menu (continued)
First level Second level
IPV6 Settings
ENWW
Third level Fourth level
Default IP
Primary DNS
Secondary DNS
Enable
Address Manual Settings
Values Description
Auto IP*
Specify the IP
address to default to
Legacy
when the print server
is unable to obtain
an IP address from
the network during a
forced TCP/IP
reconfiguration (for
example, when
manually configured
to use BootP or
DHCP).
NOTE:
assigns a static IP
address that might
interfere with a
managed network.
Auto IP: A link-local
IP address
169.254.x.x is set.
Legacy: The
address
192.0.0.192 is set,
consistent with older
HP Jetdirect products.
Range: 0 – 255 Specify the IP
address (n.n.n.n) of
Default =
a Primary Domain
xxx.xxx.xx.xx
Name System (DNS)
Server.
Range: 0 – 255 Specify the IP
address (n.n.n.n) of
Default = 0.0.0.0
a Secondary DNS
Server.
Off
Use this item to
enable or disable
On*
IPv6 operation on the
print server.
Off: IPv6 is
disabled.
On: IPv6 is enabled.
Enable Use this item to
enable and manually
Address
configure a TCP/
IPv6 address.
Tools for troubleshooting
This feature
197