HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung Seite 206

Table 2-39 General Settings menu (continued)
First level Second level
Print Quality Image
Registration
180 Chapter 2 Solve problems
Third level Fourth level
Sleep/Auto Off
After
Adjust Tray <X> Print Test Page
Values Description
Range: 1 to 120 Set the number of
minutes minutes after which
the product enters
Default = 60 minutes
Sleep or Auto Off
mode. Use the arrow
buttons on the control
panel to increase or
decrease the number
of minutes.
Shift the margin
alignment to center
the image on the
page from top to
bottom and from left
to right. You can also
align the image on
the front with the
image printed on the
back.
Use the Adjust
Tray <X> menu to
adjust the registration
settings for each tray.
Before adjusting
these values, print a
registration test
page. It provides
alignment guides in
the X and Y
directions so you can
determine which
adjustments are
necessary. You can
adjust values for X1
Shift, X2 Shift, Y1
Shift, and Y2 Shift.
Use the Print Test
Page option to print
a page to test the
image registration. It
provides alignment
guides in the X and Y
directions so you can
determine which
adjustments are
necessary.
ENWW