Fixing The Internal Battery To The Frame; Connection Of The Cable Harness To The Internal Battery - Orbea Blue Paper Rise Hydro Sl 2025 Bedienungsanleitung

81│ORBEA

FIXING THE INTERNAL BATTERY TO THE FRAME

The method of fixing the frame's internal battery is the same for all Rise-compatible Orbea Gen2 internal battery models.
See the internal battery removal and installation section for the complete mounting process.
Use only original Orbea bolts to attach the internal battery to the Rise frame.
COL-
TYPE OF COMPOUND
OUR
RETAINER

CONNECTION OF THE CABLE HARNESS TO THE INTERNAL BATTERY

To connect the cable harness to the internal battery (having first disassembled the EP801/EP6 Shimano motor) make sure that
the pins and tab on the cable and the battery port match up in the correct position.
Once the cable harness connector and battery connector make contact, turn the locking ring on the cable harness connector
anti-clockwise and press the cable connector into the battery connector.
When the connection between the cable and the battery is complete, release the locking ring so that it returns to the original po-
sition and secures the connection.
If the locking ring does not return to its original position when released, the connection is not secure
You can pull gently on the cable harness connector to check that it is securely attached to the internal battery.
See the internal battery extraction and installation method in this manual.
DESCRIPTION
Threadlock: Medium strength. Loctite 243 type.
BLUE PAPER RISE HYDRO SL-LT • 2025
EN