Orbea BLUE PAPER RISE HYDRO SL 2025 Bedienungsanleitung Seite 45

45│ORBEA
COMPRESSION ADJUSTMENT ON FOX FLOAT SHOCKS ON RISE LT
2 position lever: The 2-position lever is useful for making adjustments on the fly to control the behaviour of the shock for signif-
icant changes in terrain. You can use Open mode during technical descents and Firm mode for fairly uniform climbs. Fox rec-
ommends starting in the open position.
Adjusting the Open mode (Factory Float): This setting is useful for regulating shock during rider weight changes, g-outs, and
gradual terrain changes. Lift the Open mode adjustment dial, place it in one of the available positions (1, 2, 3), and press the ad-
justment dial to fix the position setting. Fox recommends starting in position 1.
FOX FLOAT X SHOCKS COMPRESSION ADJUSTMENT
2 position lever: The 2-position lever is useful for making adjustments on the fly to control the behaviour of the shock for signif-
icant changes in terrain. You can use Open mode during technical descents and Firm mode for fairly uniform climbs. Fox rec-
ommends starting in the open position. The Open position uses the LSC (Low Speed Compression) dial settings.
LSC (LOW SPEED COMPRESSION): The LSC dial allows for low speed compression adjustments. Turn the dial clockwise to
increase compression and anti-clockwise to decrease compression. Fox recommends starting with the dial in the Open posi-
tion (dial turned fully clockwise).
LSC compression adjustments will only take effect when the 2-position compression lever is in the Open position.
INNER AIR VOLUME REDUCERS ON FOX FLOAT X SHOCKS
You can adjust the progressiveness of your shock's air chamber with volume reducers, which can be purchased at an author-
ised Fox dealer.
Size
210x55
DHX SHOCK PRELOAD ADJUSTMENT SUGGESTIONS
The following tables give approximate values, they may vary depending on the riding style and terrain conditions.
Recommended SAG measurement
Equivalent in mm of SAG 30% in 210x55 shock
FOX DHX SHOCKS COMPRESSION ADJUSTMENT
2 position lever: The 2-position lever is useful for making adjustments on the fly to control the behaviour of the shock for signif-
icant changes in terrain. You can use Open mode during technical descents and Firm mode for fairly uniform climbs. Fox rec-
ommends starting in the open position. The Open position uses the LSC (Low Speed Compression) dial settings.
LSC (LOW SPEED COMPRESSION): The LSC dial allows for low speed compression adjustments. Turn the dial clockwise to
increase compression and anti-clockwise to decrease compression. Fox recommends starting with the dial in the Open posi-
tion (dial turned fully clockwise).
LSC compression adjustments will only take effect when the 2-position compression lever is in the Open position.
FOX DHX SHOCKS REBOUND ADJUSTMENT
The rebound dial controls how quickly the shock extends after being compressed. Turning the rebound dial clockwise slows
shock extension, while turning it counterclockwise speeds it up. Fox recommends starting with the dial in the middle position.
Factory fitted reducers volume
0.5
BLUE PAPER RISE HYDRO SL-LT • 2025
Maximum reducers volume
1.0
30%
16.5 mm.
EN