Minimum Distance Between The Wheel And Saddle In Maximum Compression; Intended Use - Orbea Blue Paper Rise Hydro Sl 2025 Bedienungsanleitung

15│ORBEA
MINIMUM DISTANCE BETWEEN THE WHEEL AND
SADDLE IN MAXIMUM COMPRESSION
The minimum distance between the rear of the saddle and
the rear wheel when the swingarm is in the maximum shock
compression position and the seatpost is in its lowest posi-
tion must be at least 25 mm. If this distance is not re-
spected, the rear wheel may come into contact with the
saddle, which can cause the rear wheel to lock, leading to
accidents and serious injuries. Damage to the components
due to a failure to follow this instruction is not covered by
the warranty conditions.

INTENDED USE

The intended use for all models is ASTM Condition 4, which
provides for use under conditions 1, 2 and 3, as well as on
technical nature trails with numerous obstacles, with higher
gradients and therefore higher speeds. Frequent and moder-
ate jumps and drops.
These models, due to the terrain, must be inspected after each
use. Use on this type of terrain requires technical skills and
can lead to injury for beginners.
For all ASTM categories, please refer to the user manual.
BLUE PAPER RISE HYDRO SL-LT • 2025
EN