Cabling; Overview Of Frame Component Cabling; Mechanical Components; Cable Pass. Cabling Between Main Triangle And Swingarm - Orbea Blue Paper Rise Hydro Sl 2025 Bedienungsanleitung

72│ORBEA
21

CABLING

OVERVIEW OF FRAME COMPONENT CABLING

MECHANICAL COMPONENTS

3
1
2
1.
Dropper seatpost remote
2.
Derailleur (mechanical)
3.
Rear brake
A.
Housings over the battery without crossing
B.
See motor compartment cabling section
C.
See Cable Pass section
D.
See Headset section

CABLE PASS. CABLING BETWEEN MAIN TRIANGLE AND SWINGARM.

The Cable Pass system protects the cables and housing between the frame's main triangle and the swingarm, and facilitates the
cabling to the motor or headset.
On Rise, Cable Pass consists of 3 elements: a guide tube for the rear derailleur housing, the set of tubes and the exit port of the
left chainstay of the rear brake line and speed sensor, and the Cable Pass cable guide at the rear of the motor compartment of
the frame's main triangle.
D
A
B
C
ELECTRICAL SYSTEM COMPONENTS
B
3
2
C
1.
Shimano EW-SD300 1200 mm cable (to junction or display)
2.
Shimano EW-SD300 700 mm cable (to SW-EN600 remote)
3.
Shimano EW-SD300 700 mm cable (with XT Di2 handle
-aftermarket assemblies-)
4.
EW-SS301 Speed sensor
5.
Orbea RS Gen2 cable harness (battery-motor-charging point)
6.
Shimano EW-SD300 70 0mm cable (with Di2 cam - aftermarket
assemblies -)
A.
See sections Motor compartment cabling and Motor connections
B.
See section Di2 cabling on handlebars and stem
C.
Cable over the battery without crossing
D.
See Cable Pass section
BLUE PAPER RISE HYDRO SL-LT • 2025
1
A
4
5
D
EN
6