Smart Charger 2A-4A Gen2 - Orbea Blue Paper Rise Hydro Sl 2025 Bedienungsanleitung

92│ORBEA

SMART CHARGER 2A-4A GEN2

See the technical specifications of the Smart Charger Gen2 in the Ebike Systems Gen 2 Technical Specifications section of this
manual.
See charger warnings and usage recommendations in the Assist System Usage Warnings section of this manual.
See here for the compatibility of Orbea Ebike System components with Orbea ebike models.
VARIABLE CHARGING CURRENT
The RS Smart Charger recognises which battery it is connected to (internal battery or Range Extender) and adapts the charging
current accordingly.
The charging current for the internal battery is 4A (100-240V). The charging current of the Range Extender is 2A (100-240V). The
charging speed of the batteries up to a charge level of 80% is higher, and then it slows down until the 100% charge level is
reached.
USING THE RS GEN2 SMART CHARGER
See the battery charging section of this manual for the method of using the Smart Charger Gen2.
MEANING OF THE SMART CHARGER LED
LED BEHAVIOUR
Blue LED flashing
Blue LED cycles on and off
LED steady blue
Steady red LED
BLUE PAPER RISE HYDRO SL-LT • 2025
STATE
Charger receiving power but not con-
nected to the battery
Charger charging the battery
Charge completed
Error. See the error resolution table
EN