Technical Specifications Of The Frame - Orbea Blue Paper Rise Hydro Sl 2025 Bedienungsanleitung

23│ORBEA

TECHNICAL SPECIFICATIONS OF THE FRAME

MATERIAL
Front triangle
Swingarm
Linkage
Linkage yoke
RECOMMENDED USE
SIZES AVAILABLE
SUSPENSION SYSTEM
ATTITUDE ADJUST
FORK TRAVEL
MAXIMUM FORK LENGTH (AXLE-TO-CROWN)
FORK OFFSET
REAR TRAVEL
SHOCK MEASUREMENTS
(EYE-TO-EYE/STROKE)
SHOCK HARDWARE
Front (Frame)
Rear (Shock yoke)
COIL SHOCKS COMPATIBILITY
FOX FLOAT X2 SHOCK COMPATIBILITY
RECOMMENDED SAG
HEADSET STANDARD
HEADSET BEARINGS
HEADSET SPACERS
MAXIMUM HEADSET SPACERS
BOTTOM BRACKET
CHAINLINE
WHEEL SIZE
MULLET COMPATIBLE
MAXIMUM REAR TYRE SIZE
RISE H SL
Hydroformed aluminium Double and triple crowned
Hydroformed aluminium Double and triple crowned
Aluminium
Trail, All Mountain. ASTM Condition 4
Orbea Concentric Boost 2 Pivot
No
140 mm
140 mm
Metric. 210x50 mm
Orbea ICR HS02 SIC (Sealed Internal Cabling)
Upper: 1-1/2 (with adaptor 1-1/2" to 1-1/8" for internal cabling)
See Headset and Stem sections
Shimano EP801/EP6 motor axle
BLUE PAPER RISE HYDRO SL-LT • 2025
RISE H LT
Aluminium
Aluminium
S, M, L, XL
Yes. Low-High
Flip Chip shock yoke
575 mm
44 mm
Metric. 210x55 mm
8x24.892 mm
8x16.46 mm
Yes*
No
25-30%
No Spinblock
Bottom: 1-1/2
HS02 exclusive
Below the stem: 30 mm
55 mm
29"
No
29x2.5"
EN
160 mm
150 mm