Position Of Cables In The Headset Compression Ring; Mounting The Hs02 Headset - Orbea Blue Paper Rise Hydro Sl 2025 Bedienungsanleitung

48│ORBEA

POSITION OF CABLES IN THE HEADSET COMPRESSION RING

MECHANICAL DERAILLEUR
Dropper seatpost
remote
SIC SEALS FOR CABLE ENTRY TO THE HS02 MANIFOLD
See the Orbea ICR Headset Standards
assemblies.

MOUNTING THE HS02 HEADSET

The position of cables in the headset and the specific components for mounting them on Rise are given in the previous sec-
tions of this technical manual.
This is a general HS02 headset assembly guide.
Installation of the HS02 headset involves installing the brake and derailleur lines to the levers and possibly bleeding hydraul-
ic brake lines. If, as a user, you do not have the necessary mechanical knowledge to carry out these operations to guarantee
safe installation, take your bike to an authorised dealer to carry out the installation. Damage to components caused by incor-
rect installation is not covered under the warranty terms.
Improper installation of the headset and/or brake and derailleur lines can cause accidents and serious injuries, including
death.
Di2 motor
cable
Rear
brake
Rear
derailleur
MECHANICAL DERAILLEURS
Rear derailleur
R3
Rear brake
Di2 motor cable
Di2 motor cable
Rear brake
Di2 & AXS DERAILLEURS
R2e
OTHER OPTIONS
R1 R2
manual on our website for more details on the SIC seal options not used in standard
BLUE PAPER RISE HYDRO SL-LT • 2025
ELECTRONIC DERAILLEURS (Di2, AXS)
Dropper seatpost
remote
Dropper seatpost
remote
L1
HS02
collector
L2 L3
EN
Di2 motor
cable
Rear
brake