Bottle Holder Plate - Orbea Blue Paper Rise Hydro Sl 2025 Bedienungsanleitung

70│ORBEA
19

BOTTLE HOLDER PLATE

You need to remove the motor and the internal battery from the frame to replace the bottle holder's internal attachment plate.
See the specific internal battery removal section of this manual for the removal process.
*
Rise has the Range Extender 210Wh external battery holder fitted as standard, which is compatible with the use of standard
bottles when the external battery is not used. The Range Extender mount does not require the washers marked in the image
for installation on the frame. However, if a standard bottle holder is mounted in place of the Range Extender mount and it does
not contact the frame, you can use washers to compensate for the clearance between the bottom of the bottle holder and the
frame. These washers are not supplied with the bicycle, but are available as part of the replacement bottle holder fixing plate.
See the spare parts section of this manual to find the part references.
BLUE PAPER RISE HYDRO SL-LT • 2025
EN