Customising The Assist Levels - Orbea Blue Paper Rise Hydro Sl 2025 Bedienungsanleitung

35│ORBEA
8.
Disconnect the bike from the app by tapping
Disconnect. The profile selected before disconnecting
will be the one active when you turn the bike back on.
See the full manual for the Etube Project Cyclist app here:
https://si.shimano.com/es/um/7J4MA
SC-EN600 DISPLAY
On models fitted with a Shimano display, you can select the
assistance profile using the display.
1.
Press and hold button A on the SW-EN-600–L remote
control to access the Display Settings menu.
2.
Use the X, Y buttons on the remote control to
navigate to the Assist Profile menu. Press button A
to select it.
3.
Use the X, Y buttons to choose the assist profile
(Profile 1=RS, Profile 2=RS+) and select by pressing
A.
4.
Use the X,Y buttons to navigate to Exit and select by
pressing A.The selected assist profile is active on the
bike.
See the complete manual for the SC-EN600 display here:
https://si.shimano.com/es/manual/search?input_model=
sc-en600

CUSTOMISING THE ASSIST LEVELS

The power levels of each assist level can be modified via the
Shimano Etube Project Cyclist mobile app for a more custom-
ised experience.
"BASIC MODE" AND "FINE TUNE" PROFILES
Each of the 2 available assistance profiles can be activated
as a BASIC or a FINE TUNE profile.
BLUE PAPER RISE HYDRO SL-LT • 2025
BASIC MODE: Within the profile there are only three assist
levels that can be selected (ECO, TRAIL and BOOST). The
assist and maximum torque characteristics of each level
can be modified separately.
FINE TUNE: Up to 15 levels of assist can be selected by re-
mote control and activated within the profile. Each level is
activated within a preset assist character, and the maximum
and minimum motor torque can be modified. All intermedi-
ate levels that are activated from the first two levels on-
wards will be visible as TRAIL on the remote control (green
light on LED 2). In this mode, the chosen assist level will ap-
pear on the display (in models with a display) as its position
within the range of active levels up to a maximum of 15.
BASIC MODE
X
OFF > ECO >
>TRAIL > BOOST
Y
BOOST > TRAIL >
>ECO > OFF
FINE TUNE (example)
X
OFF > ECO > TRAIL 1 > TRAIL 2 >
>TRAIL 3 > BOOST
Y
BOOST >TRAIL 3 >TRAIL 2 >
>TRAIL 1 > ECO > OFF
CUSTOMISING THE ASSIST LEVELS AND PROFILE
CHOICE
1.
Connect the bike to the Etube Project Cyclist app.
See the previous section Selecting assist profiles for
the method of connecting your bike to the Shimano
Etube Project Cyclist mobile app.
2.
Select the "Assist" option in the Customise tab.
EN
LED 2
BOOST
TRAIL
ECO
No assist
LED 2
BOOST
TRAIL 3
TRAIL 2
TRAIL 1
ECO
No assist
1/5