Orbea BLUE PAPER RISE HYDRO SL 2025 Bedienungsanleitung Seite 24

24│ORBEA
MAXIMUM FRONT TYRE WIDTH
DERAILLEUR HANGER
SRAM T-TYPE COMPATIBLE
REAR DROPOUTS STANDARD
REAR AXLE MEASUREMENTS
REAR AXLE THREAD PITCH
REAR AXLE THREAD LENGTH
FRONT WHEEL AXLE
SEATPOST DIAMETER
SEATPOST CLAMP DIAMETER
MAXIMUM SEATPOST INSERTION
DROPPER SEATPOST INTERNAL CABLING
COMPATIBLE
FRONT DERAILLEUR
COMPATIBLE CHAINRINGS
MAXIMUM CHAINRING SIZE
MINIMUM CHAINRING SIZE
COMPATIBLE WITH OVAL CHAINRING
CHAINGUIDE
ICGS
COMPATIBLE CRANKS
Q-FACTOR
CRANK LENGTH
DRIVETRAIN COMPATIBILITY
Di2 COMPATIBLE
SRAM AXS COMPATIBLE
BRAKE TYPE
MAXIMUM REAR BRAKE DISC SIZE
MINIMUM REAR BRAKE DISC SIZE
MAXIMUM/MINIMUM FRONT BRAKE DISC SIZE
RISE H SL
Depends on the fork
29 x 2.5" on models specified by Orbea
Sram UDH (Universal Derailleur Hanger) Washer 30mm
Boost 12x148 mm
Depends on the fork model
No. Single chainring only
With Shimano EP8/EP801/EP6 axle spline. Chainline 55 mm
Yes. Chainguide for Shimano motor E8000-EP8-EP801-EP6
Chainline 55 mm
Crank for Shimano EP8/EP801/EP6 motor
(EP801–EP6) 177 mm
11S and 12S (1X). MTB Boost. Chainline 55mm
Yes. Shimano XT RD-M8150
Connected to the motor (see section on Connection to Etube Professional)
Disc. Post Mount**
Depends on the fork model
Fox 34: 180–203 mm
Fox 34 AWL: 160–203 mm
Fox 36: 180–230 mm
Fox 36 AWL HD: 160–230 mm
BLUE PAPER RISE HYDRO SL-LT • 2025
RISE H LT
Yes
12x184 mm
1.0 mm
15 mm
31.6 mm
34.9 mm
S: 295 mm
M: 312 mm
L: 320 mm
XL: 354 mm
Yes
34T
30T
No
No
165-175 mm
Yes
203 mm
180 mm
EN