Orbea BLUE PAPER RISE HYDRO SL 2025 Bedienungsanleitung Seite 67

67│ORBEA
INSTRUCTIONS FOR CHANGING HIGH AND LOW GEOMETRIES
This process describes the change from the "High" position to the "Low" position. Perform the same process but changing
the upper pickup to the position shown in the first image to perform the reverse process
See the instructional video
1
2
3
here
on how to use Attitude Adjust technology.
1. Loosen the bolt securing the shock to the yoke with a size 6
Allen key (you can use the rear axle cam to do this).
2. Pull the top tube up until the top pickup of the Quick Flip is
positioned as shown in the image.
3. Tighten the clamping bolt again, to 6 Nm (you can provisional-
ly use the rear axle cam to do this if you are on the road).
BLUE PAPER RISE HYDRO SL-LT • 2025
EN