Mounting The Range Extender - Orbea Blue Paper Rise Hydro Sl 2025 Bedienungsanleitung

87│ORBEA
ERROR!

MOUNTING THE RANGE EXTENDER

1
If the specific RS 210 Wh Range Extender mount is not
fitted on a compatible bike, mount it using the original bolts
installed on the frame (without using washers between the
Range Extender mount and the frame).
3
Install the end without a tab of the specific RS 210 Wh
Range Extender connection cable to the external battery.
Open the cover of the bike's charging point to connect the
other end of the Range Extender cable. Open the security
tab on the cable connector before making the connection
and connect the cable to the charging point.
If the LED on the charger lights up in red when the charger is
plugged into a socket or during charging, there is a problem.
Immediately disconnect the charger and see the charger
troubleshooting section of this manual. If the problem persists,
contact an authorised Orbea dealer.
2
Insert the Range Extender battery onto the mount from the left
side of the bike.
4
Once you have connected the cable to the charging point, close
the safety tab on the connector to secure the connection.
BLUE PAPER RISE HYDRO SL-LT • 2025
EN