Installation Of The Internal Battery - Orbea Blue Paper Rise Hydro 2023 Technisches Handbuch

88 | ORBEA
R S 54 0WH/ 3 60W H GE N 2
INTERNAL BATTERIES
Refer to the RS battery maintenance, usage,
charging and storage recommendations in
the sections of this manual entitled "Main-
tenance" and "Warnings on the Use of the
See also the process for charging, switching
on and checking the level of the batteries in
the section "Relevant information about RS
batteries" for more useful information about
use, care and problem solving for the internal
TECHNICAL SPECIFICATIONS OF THE INTERNAL BATTERY
RS 540WH GEN2
VOLTAGE
CAPACITY
WEIGHT
CELLS
CHARGING TIME 100% (4A)
With RS Smart Charger Gen2
CHARGING TIME 80% (4A)
With RS Smart Charger Gen2
ASSEMBLY
CONNECTION
SEALING
CERTIFICATIONS
COMPATIBILITY
Orbea models with Shimano EP801/EP6 motors from the 2023 range
TECHNICAL MANUAL
COMPATIBILITY NOTICE. GEN2 ELECTRICAL SYSTEM
COMPONENTS
The Orbea electrical system components (internal battery
-540Wh or 360Wh-, Range Extender, cable harness and
Rise, Kemen or Urrun models from ranges prior to 2023
These Orbea Ebike Systems components from the 2023
range are designed to guarantee compatibility with Shimano
about the compatibility of all Orbea components with our
RS 360WH GEN2
36 V
540 Wh 360 Wh
3 hours 2 hours
Cable harness to motor and charging port
IPX6
ISO13849 > ISO13849-1:2015
IEC62133 > IEC62133:2017
Compatible with Orbea Ebike System Gen2 systems in
B LUE PAP ER R I SE · H YD R O 20 2 3
ATTACHMENT OF THE RS INTERNAL
BATTERY TO THE FRAME
Always use the tightening torque
The same method is used to attach the inter-
nal battery to the frame for the 540Wh and
See the section entitled "Wiring of Electri-
cal System Components" and the section
on the installation of the internal battery
for how to connect the cable harness to the
ORBEA | 89
E N
36
37
35.2
35.1
6
5 N.m
35.2
35.1
6
5 N.m
See the internal battery removal and insta-
llation section for the complete assembly
Use only original Orbea bolts to attach the in-