Orbea BLUE PAPER RISE HYDRO SL 2025 Bedienungsanleitung Seite 44

44│ORBEA
2025 Fox DHX Factory
FOX FLOAT SHOCKS SPECIFICATIONS ON RISE LT
FOX FLOAT PERFORMANCE 210x55
FOX FLOAT X PERFORMANCE 210x55
FOX FLOAT X FACTORY 210x55
FOX DHX FACTORY 210x55
FOX FLOAT/FLOAT X SHOCK AIR PRESSURE ADJUSTMENT SUGGESTIONS
Adjust the shock absorber air pressure until you reach the target SAG. Always measure SAG with the compression adjustment
dial in the Open position.
The following tables give approximate values, they may vary depending on the riding style and terrain conditions.
Recommended SAG measurement
Equivalent in mm of SAG 25% in 210x55 shock
Equivalent in mm of SAG 30% in 210x55 shock
Adjust the shock absorber air pressure until you reach the target SAG. A 25% SAG will give you a firm feel with more support,
while a 30% SAG will give you a softer ride.
FOX FLOAT Y AND FLOAT X SHOCKS ON RISE LT REBOUND ADJUSTMENT SUGGESTIONS
Once you've reached your desired sag, adjust the rebound according to the air pressure in the shock.
Use your shock's final air pressure to find your rebound setting. Turn the rebound or compression dial to the closed position
(turn fully clockwise). Then count as many "clicks" anti-clockwise as appear below.
2025, FLOAT, P-S, A, 2pos, Evol LV, Orbea, Rise LT, 210, 55, 0.6 Spacer, CM1.1, SCLRM5,
CML.
2025, FLOAT X, P-S, A, 2pos, Evol LV, Orbea, Rise LT, 210, 55, 0.5 Spacer, CS30, RL60, LML,
Rezi B40
2025, FLOAT X, F-S, K, 2pos-Adj, Evol LV, Orbea, Rise LT, 210, 55, 0.5 Spacer, CS30, RL60,
LML, Rezi B40
2025, DHX, F-S, Cr, 2pos-Adj, Orbea, Rise LT, 210, 55, 400lbs/in, SLS, CS40, RL60, LMM, Re-
zi B60
Air pressure (psi)
< 100
100–120
120–140
140–160
160–180
180–200
200–220
220–240
240–260
260–280
280–300
BLUE PAPER RISE HYDRO SL-LT • 2025
25–30%
14 mm.
17 mm.
Recommended rebound setting (clicks)
10
10
9
8
7
6
5
4
3
2
1
EN