Orbea BLUE PAPER RISE HYDRO SL 2025 Bedienungsanleitung Seite 74

74│ORBEA
3
Insert the speed sensor cable through the corresponding
hole and guide it through the Cable Pass tube to the motor
compartment.
5
Apply a small amount of mild bi-component or instant ad-
hesive to the part of the tube that contacts the hole in the
right chainstay rubber protector and finish installing it in
the protector hole. Immediately clean any excess adhesive
with isopropyl alcohol (maximum concentration 70%) and
allow to dry according to the recommendation of the adhe-
sive manufacturer.
4
Install the left chainstay's port cap.
6
Install the motor compartment cable guide. See the section Ca-
bling in the motor compartment to find the position of all the
sheaths and cables in this area.
BLUE PAPER RISE HYDRO SL-LT • 2025
EN