Cabling; Cable Routing Of The Rear Derailleur And The Rear Brake In The Frame - Orbea BLUE PAPER OIZ CARBON OIZ OMX 2023 Technisches Handbuch

42 | ORBEA

1 6 CABLING

CABLE ROUTING OF THE SHOCK
R EMOTE A ND T HE D RO PPER
SEATPOST THROUGH THE FRAME
The shock remote cable should be left with a
minimum of 3 cm of excess and tucked into
the horizontal tube parallel to the housing.
Use a cable tie to hold the excess to the hou-
sing and prevent it from rubbing against the
frame. Do not overtighten the cable tie to
allow proper operation of the shock remote.
TECHNICAL MANUAL
Zip tie. Cable tie
3cm
I-line shock
remote
Dropper
seatpost
BLUE PAPER OIZ CARBON O M X-O M R · 2 02 3
CABLE ROUTING OF THE REAR
DERAILLEUR AND THE REAR BRAKE
IN THE FRAM E
27 ICR 23 SWINGARM CABLING TUBE KIT
PART NO.: XC75
27 500 mm swingarm cabling tube
Rear Brake
Rear derailleur
QUAN T.
2
ORBEA | 43
E N
27