Audio Extraction Settings - Blackmagic Design Cintel Scanner Installations- Und Bedienungsanleitung

Audio Extraction Settings

Normally, once you have selected the film type, the automatic features in DaVinci Resolve will
extract your optical audio perfectly. However, the condition of the optical track can vary with
the condition of the film being loaded and in some instances this can confuse the automation.
If this happens, you can bypass the automatic features and make adjustments manually.
For manual adjustments, simply open the 'Audio Extraction' settings window by clicking
on 'Show Cintel Audio Settings' in the inspector options near the top right of the viewer
Audio extraction settings let you make the following manual adjustments:
Show Audio Scan Area
This checkbox turns the audio scan area guides on or off. The guides are displayed as a box on
the side of the frame covering the optical audio scan area and shows what optical information
will be used during extraction. The position of the guides will conform to the film type you have
selected. However, you can change the position manually if you need to. The audio scan area
guides are also great indicators to show you what is happening during the extraction process
so you can identify any potential troubles and make manual adjustments.
The audio extraction settings let you
make manual adjustments if needed
Capturing Using DaVinci Resolve 43