Firmware Updates; Performing A Firmware Update - Blackmagic Design Cintel Scanner Installations- Und Bedienungsanleitung

Firmware Updates

Cintel Scanner and Audio and KeyKode Reader both have internal firmware that may need an
update after you install the Cintel Scanner software on your computer.
Cintel Scanner
After you install the Cintel Scanner software on your computer and connect the Cintel Scanner,
it will determine whether your scanner's firmware needs an update.
DaVinci Resolve shows a message when the Cintel Scanner is locked
Audio and KeyKode Reader
When the KeyKode Reader requires a firmware update, the reader is locked and DaVinci
Resolve shows a message to remind you to update the Reader's firmware, similarly to
firmware updates as shown in the previous image.

Performing a Firmware Update

Software updates for the firmware on your Cintel Scanner and Audio and KeyKode Reader are
managed through the Cintel Setup utility.
To update the firmware for Cintel Scanner or Audio and KeyKode Reader:
1 Connect your Cintel Scanner to power and to your computer's Thunderbolt 3 or PCIe port.
2 If you are updating the Audio and KeyKode Reader, connect it to your
computer with a USB-C cable.
3 Run the Cintel Setup utility and select the scanner or audio device.
4 Click the settings button and go to the 'setup' tab. If an update is available, click the
'update' button.
The 'setup' tab shows you if a new version of firmware is available for Cintel
Film Scanner or Cintel Audio and KeyKode Reader
The firmware is now up to date, giving you the latest settings, features and compatibility.
Getting Started 12