Object Removal - Blackmagic Design Cintel Scanner Installations- Und Bedienungsanleitung

Object Removal

The object removal plugin is best used in the 'color' page, and uses the DaVinci Neural Engine
to attempt to remove an object in the frame as automatically as possible. This plugin works best
when removing a moving object that passes over a temporally stable background, or dirt on
the lens of a shot where the camera is in motion. Smaller objects get better results than larger
objects, but your results really depend on the footage. Here's a simple procedure that shows
how to do this.
To remove a moving object from a clip:
1 In this example, a drone is flying through a long shot that's being simultaneously recorded.
We'll remove the drone using a window to identify the feature to be removed using the
object removal plugin.
The original shot with a drone that needs to be removed
In simple cases, it's often easiest to apply the object removal effect to a corrector node,
so you can use a window or qualifier within that node to isolate the feature you want to
remove. That's what we'll do in this example.
2 Use the Window palette to draw a window around the object that needs to be removed.
You'll get the best results using windows or masks that hug the feature being removed
fairly closely.
3 Track or keyframe the window to move with the feature you're removing. Again, you'll get
better results the closer your window hugs the object being removed, and it's good to have
some softness at the edge of this window.
The object that needs to be removed is isolated with a window
4 Drag and drop the object removal plugin onto the node in which you've just isolated the
feature to be removed.
Object Removal 122