Blackmagic Design Cintel Scanner Installations- Und Bedienungsanleitung Seite 15

B/A is your scanner's default wind type which has the feeding spool traveling in a clockwise
direction and the taking spool traveling counter clockwise. Refer to the 'wind types' section in
this manual for more information.
This is a good time to make sure that your settings are appropriate for your film type and size.
You can select the appropriate film type and gauge in DaVinci Resolve's film scanner panel, as
well as 8mm, 16mm, 35mm and various perforation layouts.
Preparing the Take Up Spool
Slide the supplied 75mm spool core and core clamp onto your scanner's taking spindle.
To apply the core clamp, hold in the clamp's button and push it onto the spindle until you feel
resistance, then release the button and push the clamp on the rest of the way until you hear
a 'click.'
Loading Film
Load your film reel or core onto the feeder spindle following the same procedure in step 3.
Note that the procedure differs slightly depending on whether your film is on a core or a reel,
and whether it is 35mm, 16mm or 8mm. For example, when loading a core, you'll need to insert
the provided backing plate, whereas loading a reel only requires the use of spacers.
The illustration above shows loading a 35mm film reel and core. When loading
film reels, the backing plate is not required and you can simply use the spacers
provided. When loading film on a core, the supplied backing plate is required.
Lacing Film
Gently lace several feet of the film leader through your scanner's rollers using the following
illustration as a guide.
Your scanner's default B/A wind loads from the bottom of
the feeding spool and onto the top of the taking spool
Getting Started 15