Blackmagic Design Cintel Scanner Installations- Und Bedienungsanleitung Seite 102

4 Click on the 'text+' node icon from the toolbar of commonly used nodes and drag it to
the node panel near the 'tracker' node. Connect the 'text' output square to the green
foreground input on the 'tracker'.
5 Click on the 'tracker' node and type '1' so you can see the merged results on your left hand
viewer. In the 'tracker' inspector panel, click on the 'operations' tab. Click the menu next to
operation and select 'match move'.
6 Click the 'text' node to reveal the properties in the inspector. Type your text into the text
box and change the font, color and size to suit your composition.
This will apply the tracking position data from your tracker to your text. If you want to
change the text offset, click on the 'trackers' tab back in the inspector panel and use the
x and y offset scroll wheels to modify the position.
Now you can play back your composition and see your text attached to the object you
have tracked!
The green square is the tracker's current position along the green path,
and the red dashed line is the offset position used to animate the text.
Scroll wheels at the bottom of the tracker inspector
panel let you adjust the offset position for the text
Working with Clips in DaVinci Resolve 102