Zertifikate Und Zulassungen - Siemens Simatic Rf600 Projektierungshandbuch

10.1.9

Zertifikate und Zulassungen

Tabelle 10-8 Zulassungen für Weitbereichsnetzteil für SIMATIC RF-Systeme (Europa, UK):
Kennzeichen
Tabelle 10-9 Zulassungen für Weitbereichsnetzteil für SIMATIC RF-Systeme (USA): 6GT2898-0AC20
Kennzeichen
Engineering Conditions of Acceptability
For use only in or with complete equipment where the acceptability of the combination is
determined by ULLLC. When installed in an end-product, consideration must be given to the
following:
• Reference temperatures on the unit enclosure were measured during heating test. The max
obtained temperature with condition C at Enclosure I was 81.5 °C. See chapter "Technische
Daten (Seite 479)" Additional Information for normal load condition details.
• The unit is completely encapsulated. Potting improve mechanical and thermal properties of
the unit.
• The following Production-Line tests are conducted for this product: Electric Strength,
Earthing Continuity
• The end-product Electric Strength Test is to be based upon a maximum working voltage of:
Primary-Earthed Dead Metal: 300 Vrms, 342 Vpk; Primary-SELV: 300 Vrms, 613 Vpk
• The following secondary output circuits are SELV: 24 Vdc output of the unit.
• The following secondary output circuits are at non-hazardous energy levels: 24 Vdc output.
SIMATIC RF600
Projektierungshandbuch, 04/2024, J31069-D0171-U001-A24-0018
6GT2898-0AC00, 6GT2898-0AC10
Beschreibung
CE-Zulassung nach
• 2004/108/EG - EMC
• 2006/95/EG - Voltage directive
Funkzulassung für Russland, Weißrussland, Kasachstan
Beschreibung
Dieses Produkt ist nach UL für USA und Kanada zertifiziert.
Es erfüllt folgende Sicherheitsstandards:
• UL 60950-1
Information Technology Equipment - Safety - Part 1: General Requirements
• CAN/CSA C22.2 No. 60950-1-07
Safety of Information Technology Equipment.
• cURus +CB - UL/IEC 60950-1
and Limited power source under UL 1310
• UL Report E 205089
10.1 Weitbereichsnetzteil für SIMATIC RF-Systeme
Zubehör
483