Ic-Fcb-Information - Siemens Simatic Rf600 Projektierungshandbuch

Reader
5.7 SIMATIC RF690R/RF695R
It is the responsibility of the operator and professional installer to ensure that only certified
systems are deployed in the United States. The use of the system in any other combination
(such as co-located antennas transmitting the same information) is expressly forbidden.
FCC Exposure Information
To comply with FCC RF exposure compliance requirements, the antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or
transmitter.
5.7.8.2

IC-FCB-Information

Siemens SIMATIC RF690R (FCC): 6GT2811-7AD20-1AA0
Siemens SIMATIC RF695R (FCC): 6GT2811-7DD20-1AA0
IC: 267X-RF69XR
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
In order to comply with ISED RF Exposure requirements, this device must be installed to
provide at least 20 cm separation from the human body at all times
To comply with Industry Canada licence-exempt RSS standard(s), the system must be
professionally installed to ensure compliance with IC certification.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio-
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Afin de se conformer aux exigences d'exposition RF ISED, cet appareil doit être installé pour
fournir au moins 20 cm de séparation du corps humain en tout temps.
Pour se conformer aux normes RSS exemptes de licence d'Industrie Canada, le système doit
être installé par un professionnel afin d'assurer la conformité avec la certification IC.
Industry Canada Notice
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
permitted for successful communication.
Transmitter power and antenna information for antennas with a gain less than 6 dBi:
This device has been designed to operate with the SIMATIC RF615A antenna 902-928,
the SIMATIC RF622A antenna 902-928, the SIMATIC RF650A antenna 902-928 as well as
the SIMATIC RF662A antenna 902-928 listed below, and having a maximum gain of 5,5
236
Projektierungshandbuch, 04/2024, J31069-D0171-U001-A24-0018
SIMATIC RF600