Sentiotec Pro D Montage- Und Gebrauchsanweisungen Seite 17

Installation instructions, only for experts
1. Cut out the 70 x 65 or 60 x 48 mm recess using a jigsaw, for example (see Fig.5
and Fig.6).
2. Provide cable guides for the connecting cables.
3. Screw the housing to the cabin wall through the hole with the 4 or 2 wood
screws enclosed.
Fig.5 Installing the Pro D control panel
Fig.6 Installing the control panel additional output (optional)
p. 17/31
EN