Setting The Duration; Cancelling The Post-Drying Program (Pro D3 / Pro D3I Only) - Sentiotec Pro D Montage- Und Gebrauchsanweisungen

Instructions for use for the user

10.17. Setting the duration

When you start the sauna, you can already determine how long the sauna is
to operate. In this case, the maximum heating time cannot be exceeded (e.g. 6
h for private saunas). The sauna operation must already be started before the
operating time can be set.
1. Select the temperature symbol 5 by pressing the mode button D.
2. Press the On/Off button A and the minus button C simultaneously for about
3 seconds.
► The display 1 shows the "hours" (flashes slowly).
3. Set the desired duration in hours with the plus button B and the minus button C.
4. Press the mode button D for about 3 seconds.
► The display 1 shows the "minutes" (flashes quickly).
5. Set the desired duration in minutes with the plus button B and the minus
button C.
6. Press the On/Off button A to save the set operating time.
► The sauna control unit switches off all functions after the set operating time.
► Then the sauna control unit is in standby mode.

10.18. Cancelling the post-drying program (Pro D3 / Pro D3i only)

After combined mode, the post-drying programme is started automati-
cally. This involves heating the sauna cabin to 80°C with the fan running
(standard = 30 minutes - depends on the setting in the technician menu).
In the display 1, the text "dry" is displayed and the temperature symbol flashes.
● Press the On/Off button A for about 3 seconds to cancel the post-drying
program.
To prevent mould and rot from forming, the post-drying programme should
NOT be stopped.
p. 51/62
EN