Switching Off Functions; Deactivating The Control Panel; Switching Off The Power Unit - Sentiotec Pro D Montage- Und Gebrauchsanweisungen

Instructions for use for the user
If the door is opened - "dor" appears on the display
1. In "Standby for remote operation" mode: To continue the mode, close the
door and press the On/Off button A for about 3 seconds.
► In the display 1 a countdown of 30 seconds is again displayed.
2. In standby mode (---): acknowledgement takes place automatically when
the door is closed.

10.20. Switching off functions

You can switch off each function individually.
1. Select the function you wish to switch off by pressing the mode button D.
2. Press the On/Off button A.
► The respective function is switched off.
► The display 1 shows "oFF".
If you switch off the sauna heater (temperature function A), the vaporizer
(humidity function B) is automatically switched off.

10.21. Deactivating the control panel

● Press the On/Off button A for about 3 seconds.
► The display 1 shows "---".
► The sauna control unit is in standby mode.

10.22. Switching off the power unit

If you will not be using the sauna control unit for an extended period of time,
switch the sauna control unit off at the power unit.
● Press the On/Off button F.
► The display 1 goes out.
► The sauna control unit is switched off.
p. 53/62
EN