Operation; Switching On The Light On The Power Unit (Cleaning Lights); Switching On The Power Unit - Sentiotec Pro D Montage- Und Gebrauchsanweisungen

Instructions for use for the user

10. Operation

10.1. Switching on the light on the power unit (cleaning lights)

The light in the sauna cabin can be switched on and off at the power unit inde-
pendently of the On/Off switch F.
● To switch the light on or off at the power unit, press the light switch E.
If the light switch E is switched on, the sauna cabin light will operate at
full power. If you wish to dim the light using the control panel, switch off
the light switch E .

10.2. Switching on the power unit

WARNING!
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place combustible objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before the sauna control unit is switched on.
In order to be able to use the control panel, the power unit must be switched on.
● Press the On/Off button F to switch the power unit on.
► The control panel is in standby mode.
► The display 1 on the control panel shows "---".
p. 41/62
EN