Removing The Propeller; Checking The Propeller; Installing The Trim Tab - Yamaha FT25B Ergänzung Zur Wartungsanleitung

LOWR
1
2
6030
LOWER UNIT
6020
6050

REMOVING THE PROPELLER

Remove:
• Propeller
WARNING
Do not hold the propeller with your hands
when removing or installing it. Be sure to
remove the battery leads from the batteries
and the lanyard engine stop switch. Put a
block of wood between the cavitation plate
and propeller to keep the propeller from
turning.
REMOVING THE LOWER UNIT
Loosen:
• Locknut 1
• Adjusting nut 2
NOTE:
When removing the shift rod joint, first shift
into reverse and loosen the locknut 1.
Then, shift into forward and loosen the
adjusting nut 2.

CHECKING THE PROPELLER

Check:
• Blades
• Splines
Cracks/damage/wear → Replace.

INSTALLING THE TRIM TAB

Install:
• Trim tab
NOTE:
To ease installation, mark the original posi-
tion of the trim tab.
– 26 –
E