Yamaha FT25B Ergänzung Zur Wartungsanleitung Seite 68

POWR
CAMSHAFT AND VALVES
5020
2
1
5030
5040
REPLACING THE VALVE GUIDES
Replacement steps
NOTE:
Heat the cylinder head in an oven to 200 ˚C
(392 ˚F) to ease guide removal and installa-
tion and to maintain the correct interference
fit.
(1) Remove the valve guide using the
valve guide remover and installer.
(strike from the combustion chamber
side)
Valve guide remover and installer
90890-06801
(2) Install the valve guide (new) using the
valve guide remover and installer, and
attachment until the circlip contacts
with the cylinder head. (strike from the
cylinder head cover side)
Valve guide installer
attachment................................ 1
YM-04015 / 90890-06802
Vlave guide remover and
installer...................................... 2
90890-06801
(3) Bore the valve guide using the valve
guide reamer.
Valve guide reamer
90890-06804
– 22 –
E
5