Inhaltsverzeichnis
Werbung
Cautions
1.
The adapter is sterile and nonpyrogenic. Do not use the adapter if either of the following
conditions is true:
•
The end caps are not in place.
•
The spike is disconnected from the adapter.
2.
A leak could occur if either of the following conditions is true:
•
The adapter is not connected to a tubing set before spiking an AC container.
•
The spike is disconnected from the adapter.
Procedures for Use
Using aseptic technique, follow these instructions to use the Anticoagulant Connection Adapter.
1.
Remove the adapter from the packaging.
2.
Remove the end cap from the luer connector on the AC line of the tubing set.
3.
Remove the end cap from the AC connector on the adapter.
4.
Connect the luer connector on the AC line of the tubing set to the AC connector on the adapter
using a twisting motion.
5.
Remove the end cap from the spike on the adapter.
Note: If you disconnect the spike from the adapter, a leak could occur.
6.
Insert the spike on the adapter into the AC container.
7.
If the AC is in a hard-sided container, such as a bottle, open the vent below the spike to allow the
solution to flow.
Symbols and Certifications
Symbol
Indicates the product quantity when the quantity is placed in the
square.
Indicates the manufacturer of the product when accompanied by
the name of the manufacturer.
Indicates the expiration date of the product when accompanied by
a specific date.
Indicates the date of manufacture (or sterilization date, if the
product is sterile) when accompanied by a specific date.
Indicates the product catalog number when accompanied by a
number.
3
Definition
Werbung
Inhaltsverzeichnis
