Important Safeguards - Redmond RMK-M911E Betriebsanleitung

Carefully read all instructions before operating and save them for future reference. By carefully following these instructions you
can considerably prolong the service life of your appliance.

IMPORTANT SAFEGUARDS

• The mafufacturer shall not be responsible for any failures arising from the
use of this product in a manner inconsistent with the technical or safety
standards.
• This appliance is a multifunctional appliance and is intended to be used for
nonindustrial use in household and similar spheres of application: at home
kitchens, offices and other working environments, country houses, by clients
in hotels, motels and other residential environments. Industrial application
or any other misuse will be regarded as violation of proper service conditions.
Should this happen, manufacturer shall not be responsible for possible
consequences.
• Before plugging in the appliance ensure that the circuit voltage matches
operating voltage of the appliance (see technical specifications or manufac-
turer' s plate on the appliance).
• Use an extension cord designed for power consumption of the appliance as
the parameter mismatch may result in a short circuit or fire outbreak.
• The appliance must be grounded. Connect the appliance only to a properly
installed power point. Failure to do so may result in the risk of electrical
shock. Use only grounded extension cords.
CAUTION! While in use the appliance heats up! Care should be
taken to avoid touching the housing, bowl, or any other metal parts
while operating. Make sure your hands are protected before handling
the device. To avoid burns, do not lean over the appliance while
opening the lid.
• When changing the position of the disc heating element it is necessary to
use the tongs, included in set — it will eliminate the possibility of burns or
other accidental injuries.
• When setting the heating disc to the upper position, ensure it is tightly fixed
in the slots on the walls of the working chamber. Incorrect mounting of the
heating element may lead to both its unrestricted displacement during
operation and failure.
Be sure to use a thermal glove for gripping the tongs. DO NOT touch
the heating disc regardless of the position it's in!
To avoid electrocution do not change the position of the heating
element, if the appliance is plugged in!
DO NOT close the lid if the disc heating element is set to an upper
position.
• Unplug the appliance after use, before cleaning or moving. Remove the
power cord with dry hands holding it by the plug, not cord.
• Do not place the cord in doorframes or by heat sources. Do not twist or bend
the power cord, ensure it is not in contact with sharp objects, corners and
edges of furniture.
PLEASE, NOTE: damaging the cord may lead to a failure that will not
be covered by the warranty. If the cable is damaged or requires replac-
ing, contact an authorized service centre to have the cord replaced.
• Never place the device on soft surfaces or cover it to keep ventilation slots
clear of any obstruction.
• Do not operate the appliance outdoors to prevent water or any foreign object
or insect from getting into the device. Doing so may result in serious damage
of the appliance.
• Always unplug the device and let it cool down before cleaning. Follow clean-
ing and general maintenance guidelines when cleaning the unit.
DO NOT immerse the device in water or wash it in running water!
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
GBR
RMK-M911E
7