Siemens SIMOCODE pro System Administration Handbuch Seite 539

Node-ID DatenTyp
183 Boolean
184 Boolean
185 Boolean
186 Boolean
187 Boolean
188 Boolean
189 Boolean
192 Boolean
193 Boolean
194 Boolean
195 Boolean
196 -
197 Boolean
198 Boolean
199 Boolean
200 Boolean
201 Boolean
202 Boolean
204 Boolean
205 Boolean
206 Boolean
208 Boolean
209 Boolean
210 Boolean
212 Boolean
213 Boolean
214 Boolean
215 Boolean
216 Boolean
217 Boolean
218 Boolean
219 Boolean
220 Unsigned Byte
228 Boolean
229 Boolean
230 Boolean
231 Boolean
232 Boolean
233 Boolean
234 Boolean
235 Boolean
SIMOCODE pro PROFINET
Systemhandbuch, 10/2015, NEB631672701000/RS-AC/003
Beschreibung
Event - Limit Monitor 4
Event - External Fault 1
Event - External Fault 2
Event - External Fault 3
Event - External Fault 4
Event - External Fault 5
Event - External Fault 6
Event - AM1 Open Circuit
Event - DM-F Safety-oriented tripping
Event - Monitoring interval for mandatory testing - Test required
Event - Time set (NTP)
-
Event - Time synchronized (NTP)
Event - DM-F LOCAL o.k.
Event - DM-F PROFIsafe active
Event - Configured Operation Panel missing
Event - Module not supported
Event - No module voltage
Event - Memory Module read in
Event - Memory Module programmed
Event - Memory Module erased
Event - Initialization Module read in
Event - Initialization Module programmed
Event - Initialization Module erased
Event - Parameter Blocking during start-up active
Event - Parameter changes not allowed in the current operating state
Event - Device does not support the required functions
Event - Wrong Parameter
Event - Wrong Password
Event - Password Protection active
Event - Factory Settings
Event - Parameter setting active
Event - Prm-Error-Number
Event - DM-F LOCAL configuration mode
Event - DM-F LOCAL - Actual configuration and desired configuration different
Event - DM-F LOCAL waiting for start-up test
Event - DM-F incorrect PROFIsafe address or incorrect PROFIsafe parameter
Event – Initialization Module write protected, paramteter changes not allowed
Event - Memory Module write protected
Event - Initialization Module write protected
Event - Initialization Module-Identification data write protected
Tabellen
16.2 OPC-UA-Variablen
539