Maintenance And Troubleshooting; Safety Information Relating To Maintenance And Troubleshooting; Maintenance Plan - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

9

Maintenance and troubleshooting

9.1

Safety information relating to maintenance and troubleshooting

Improperly performed maintenance and troubleshooting
9.2

Maintenance plan

Maintenance intervals
The following sections describe the maintenance work necessary for optimum, fault-free
operation of the control.
If increased wear is noticeable during regular inspections, shorten the required maintenance
intervals according to the actual signs of wear.
If you have any questions about maintenance work and intervals, please contact RK Rose+Krieger
⮱
GmbH "Customer service" on page 134. Maintain components provided by the operator
regularly according to the specifications provided by the respective manufacturers.
Assembly instructions for the RK MultiControl II duo accu/DC control
WARNING!
Risk of injury due to improperly performed maintenance and
troubleshooting work!
Improper maintenance and troubleshooting work can lead to injury
and property damage.
– Before starting work, pull the mains plug and ensure that
there is sufficient space for assembly.
– Ensure that the assembly site is kept clean and tidy at all
times! Components and tools lying around or on top of one
another are sources of accidents.
– If components have been removed, ensure that they are
assembled correctly, reinstall all the fixing elements and
adhere to the screw tightening torques.
– Observe the following before re-commissioning:
– Ensure that all maintenance and troubleshooting
work has been performed and completed according
to the specifications and information in this manual.
– Ensure that nobody is still in the danger zone.
237