Error History - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

220
Selecting a menu
Select the menu via "Control" → "Service" → "Error history" (Figure
1.
⇨ The "Error history" menu (Figure 94) is displayed.
93).

Error history

No. Description
1 Operating run time of the control
In this case: 0 days, 0 hour, 30 minutes, 01 seconds
2 Type of error
In this case: Error code "E38"
3 Time of the error within the operating run time
In this case: 0 days, 0 hours, 27 minutes, 45 seconds
The difference between the current operating run time and the time of the
error within the run time is how long ago the error occurred before the
current time.
Thus, the error occurred 0 days, 0 hours, 2 minutes and 16 seconds ago.
4
Exit the menu (press the
5 Error number
In this case: 1. Error within the operating run time
Figure 94 - "Error history" menu
Assembly instructions for the RK MultiControl II duo accu/DC control
Figure 93 - Selecting a menu
⮱
"Table of parameters" on page 227
button)