Transportation And Storage - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

5

Transportation and storage

Transport inspection
Immediately check the delivery upon receipt to ensure that it is complete and free from transport
damage. Report the extent of any damage to the person responsible and to RK Rose+Krieger
GmbH immediately.
Storage
◼ Only place it on a load-bearing substrate.
Store controls in the following conditions:
◼ Avoid any contact with solvent-based paints.
◼ Do not store in an atmosphere with solvent content.
◼ Storage temperature: -25 to 80 °C
◼ Relative humidity: 30 % - 75 %, avoid condensation.
◼ Temperatures below the dew point are not permitted.
◼ Ambient air pressure: 700 hPa - 1600 hPa
Assembly instructions for the RK MultiControl II duo accu/DC control
Figure 20 - Transport inspection
NOTE!
Damaged controls must not be commissioned!
Any different ambient conditions must be approved by RK
Rose+Krieger GmbH.
163