Phoenix Mecano RK Rose+Krieger RK MultiControl II duo accu/DC control Montageanleitung Seite 183

Symbol
Assembly instructions for the RK MultiControl II duo accu/DC control
Function of the control in the sync BUS (s: slave; 5: Slave number (1 - 7))
Function of the control in the sync BUS (m: master; maximum of one master
per sync BUS)
The hand switch has been reset. Symbol is displayed for 5 seconds
A password for the functions has been entered in the "Control" menu. To
disable the functions or to enter a different password, open the "Logout"
⮱
menu item. Page 231
Active user (1 - 3, in this case: user 1)
Upward stroke limitation active
Downward stroke limitation active
Current height indication with set unit of measurement (in this case: 28.7 cm)
Press function key . Drive moves to memory position 1 of the active user.
Press function key . Drive moves to memory position 2 of the active user.
Press function key . The display corresponding to this symbol is confirmed.
Battery display
Function
183