Technical Specifications - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

11

Technical specifications

Exceeding the load specifications
RK MultiControl II duo accu/DC control
Properties
Dimensions
Weight
Supply voltage
Maximum power consumption
Nominal power
Standby input power*
Maximum number of drives
Maximum output current
Nominal and output voltage
Duty cycle (DC)
Protection class
Protection rating
Room temperature
Air pressure
Relative air humidity
244
NOTE!
Material damage due to load specifications being exceeded!
If the load specifications defined by RK Rose+Krieger GmbH
are exceeded, there is a risk of personal injury and material
damage.
– Never exceed the load specifications.
MultiControl II DC
24 - 28 VDC (SELV/PELV)
Example: 20 mins cycle time (4 mins operating time, 16 mins rest
* Standby input power in standard configuration with a hand switch. Standby
input is higher in combination with Multilift I/Multilift synchron.
Assembly instructions for the RK MultiControl II duo accu/DC control
121 mm x 105 mm x 44 mm
5 A per drive, 10 A total
24 - 28 VDC
with nominal load 20 % DC:
+5 °C - +40 °C
700 hPa - 1600 hPa
30 % - 75 %
RK MultiControl II duo accu/DC
control
220 g
28 VDC (+- 2 V)
10 A
280 W
< 0.3 W
2
28 VDC
time)
III
IP20