Overview; Carrying Out Initialization - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

7.1

Overview

Operating interface
Figure 31 - Hand switch operating interface
The drives connected to the control are moved by pressing the buttons
7.2

Carrying out initialization

Non-synchronous movement
178
NOTE!
Material damage as a result of non-synchronous movement
of mechanically connected drives!
An initialization run of the drives must be performed
before commissioning or installing them. There is a risk of
breakage during the initialization run if drives are connected
mechanically and moved non-synchronously.
– Only carry out the initialization run without a load and with
extreme caution.
– Only move the drives by sight.
Assembly instructions for the RK MultiControl II duo accu/DC control
1 Button [down]
2 Button [up]
.