Select User" Menu - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

Moving to memory position
3.
Press and hold the
⇨ The drive stops automatically when the stored memory position (e.g. 28 %) is
to move to is saved.
reached.
8.8

"Select user" menu

◼ The short menu for the hand switch is displayed.
Prerequisite:
Selecting a menu
1.
Select the "Select user" menu ( ).
Assembly instructions for the RK MultiControl II duo accu/DC control
button ( ) or the
The stored memory positions are retained after the control is switched
off.
Figure 113 - Moving to a memory position
The function allows a user to be selected. User 1 (
the active user at the factory and is displayed at the top right of
the display screen.
button ( ) on which the position you wish
⮱
8.3.2 on page 188
) is set as
235