Phoenix Mecano RK Rose+Krieger RK MultiControl II duo accu/DC control Montageanleitung Seite 192

192
8.4.1.1.3 "Relative positioning" mode
This function activates relative positioning.
It is used for gradual positioning to a defined value (e.g.
20 % or 20 mm) in relation to the current position of the
drive.
◼ The main menu for the hand switch is displayed.
Prerequisite:
187
Selecting a menu
Select the menu via "Hand switch" → "Premium functions" →
1.
⇨ The display screen switches to the "Relative positioning" mode
"Settings of function keys" → "Relative positioning" (Figure 45).
(Figure 46).
Setting the relative target position
2.
Press the
3. Set the relative target position (stroke of the drive Figure 47).
Assembly instructions for the RK MultiControl II duo accu/DC control
Figure 45 - Selecting a menu
button ( ).
Figure 46 - "Relative positioning" mode
⮱
Section 8.3 on page