Overview; Operating Interface; Button Function - Phoenix Mecano Rk Rose+Krieger Rk Multicontrol Ii Duo Accu/Dc Control Montageanleitung

8.1

Overview

Operating interface

Figure 32 - Operating inter-
Symbols on the display screen
Symbol
182
face
RK Rose+Krieger GmbH logo
Synchronisation bus (sync BUS) is active
Assembly instructions for the RK MultiControl II duo accu/DC control
No. Button
Figure 32/1 Display (symbols
screen" on page 182)
Figure 32/2
Figure 32/3
Figure 32/4
Figure 32/5
Figure 32/6
Figure 32/7
* The buttons are only numbered "1" and "2" in these
instructions for reasons of clarity. In reality the function keys are
not marked.
Function
⮱
Table "Symbols on the display
The buttons [1]* and [2]* open or
execute the fields/functions directly
above on the display screen.
Depending on the selected menu, the
symbols on the display screen and thus
the function of the function keys change.
The drives connected to the controls are
moved by pressing the [UP] and [DOWN]
buttons.
Moreover, the individual menu items
can be selected within the control, and
parameter values can be set.
Pressing the [M] button opens the main
⮱
menu Page 187.
Pressing the [F] button opens the short
⮱
menu Page 188.
Function